Plumbing Glazed Pottery Into Fountains

Published on July 1, 2011

Place PVC female adapter on PVC pipe, thread onto fitting
Place PVC female adapter on PVC pipe, thread onto fitting

This inexpensive technique makes for a quick and watertight adaptation of glazed pottery into a fountain. Use of PVC standpipe allows plume of water at top and an easy way to drain pot in cold weather.

**What You’ll Need**

Drill
½˝ Masonry Drill Bit
¾˝ PVC Female Adapter
¾˝ Thread x 1˝ Barb Fitting
¾˝ PVC Pipe
Underwater Epoxy
Circular Saw
Cardboard or Carpet to put under pot while working on it

*Please see the pictures for the 9 steps for plumbing glazed pot into a fountain.*

http://nelsonwatergardens.com

Kloubec Koi Farm

Leave a Comment

Your email address will not be published.

More Articles

New Pro-Clear Air Aeration Compressors

Designed for the demanding job of 24-hour operation, these dual linear-diaphragm air compressors ...

Contractor’s Corner | A Pond of One’s Own

Bill harvested several spectacular rocks that have flat planes as well as mountain ...

The Pond Guy Named a Winner of the Top Workplaces 2022 Award by the Detroit Free Press

The Pond Guy has been awarded a Top Workplaces 2022 honor by The ...

Reflection Pool Retrofit: From splash pad to sun shelf and reflection pool

The “natural Sun shelf” and reflection pool after sunset provides just the right ...

Contractor's Corner

Sponsored by Pondliner

Scroll to Top