Built on a Grand Scale: Inside a 100-Foot Recreation Pond

Published on October 26, 2026

Large rec pond in Fletcher NC

Fletcher, North Carolina, is home to what may be one of the largest recreation ponds on the East Coast. It checks nearly every box a water feature can check: an intake bay skimming system, an Aquascape upflow bog filtration system, a dock, dedicated fishing pools stocked with bass, a beach entry, aeration, massive stone patio slabs for sunbathing, stairs, benches, statuary, dense plantings of aquatic plants and full night lighting. At roughly 100 feet long and 60 to 80 feet wide, it sits in its own category.

Water artisans creating natural pond features for the contest 2026.

For Joe Zawistowski, founder of Black Koi Water Features, the project’s scale sets a new precedent for both water feature size and design. It isn’t quite a traditional recreation pond, ecosystem pond or natural pond. Instead, it falls somewhere in between, combining the scale of a larger natural body of water with the careful design, craftsmanship and attention to detail of a custom-built water feature.

A challenging foundation

moving giant boulders

The project began as a low, unfinished indentation in the property. Building in a low-lying area presents drainage and groundwater challenges that contractors typically try to avoid, and this site delivered nearly all of them.

During excavation, the crew encountered three separate underground springs, with water bubbling directly out of the ground. Managing that groundwater required an extensive underdrain system designed to channel water from beneath the pond, under the road and to daylight on the opposite side of the property.

The challenges extended beyond groundwater management. Moving boulders large enough to complement the pond’s massive footprint required renting a specialized excavator capable of lifting stone far beyond the capacity of equipment typically used on residential water features.

Construction took place during June and July, among the hottest and often wettest months in western North Carolina. For several consecutive weeks, afternoon rainstorms complicated progress, particularly before the liner installation and rock placement could begin.

Between the unpredictable weather, underground springs and enormous stonework, the project became one of the most physically demanding builds the Black Koi crew had undertaken.

Features designed to be explored, not just viewed

Plans for the Fletcher NC rec pond

A handful of details set this build apart from a standard recreation pond.

While clearing the site, the crew came across a large, decaying oak log in the surrounding woods, from a tree an estimated 24 to 30 inches in diameter. Rather than leave it behind, they worked it directly into the feature. Partially submerged, it adds biodiversity value and a strong visual anchor, functioning as much for its “wow factor” as for the ecosystem benefit.

Toward one end of the pond is what the crew calls the remediation zone, a shallow sanctuary area that stays out of reach of the pond’s larger fish and predators. It’s where tadpoles, small fish, aquatic plants and microbes can establish with less competition, and it doubles as a nutrient sink that helps support the system’s ecological balance.

The sunbathing slabs are their own destination. Cut to roughly 10 feet across and set right at the edge of the pond’s deep water, they allow swimmers to enter the water directly and climb back onto stone warmed by the sun.

The sunbathing slabs are their own destination. Cut to roughly 10 feet across and set right at the edge of the pond’s deep water, they allow swimmers to enter the water directly and climb back onto stone warmed by the sun.

Multiple destinations encourage different interactions

What makes the design particularly interesting is how these elements work together. Rather than creating a single focal point, the pond offers multiple destinations, each encouraging a different interaction with the water. Visitors can move from the beach entry to the stone terraces, explore the shoreline or spend time fishing from the dock. The result is a water feature that functions as an extension of the property’s outdoor living space.

The waterfall is the feature’s centerpiece, and Zawistowski intentionally designed it to look different from waterfalls Black Koi has created on other projects. It narrows at the top and progressively widens toward the base, mimicking the way waterfalls naturally form.

As part of that approach, Zawistowski typically reserves some of a project’s largest boulders for the waterfall, where their scale can have the greatest visual impact.

That strategy is especially evident here. The largest boulder, framing the second drop, stands roughly 5 feet tall and weighs approximately 8,000 to 10,000 pounds. Several others in the structure weigh closer to 6,000 pounds each.

Filtration built to match the scale

waterfall flowing into pond in NC

A pond of this magnitude requires a filtration system capable of supporting its substantial water volume while maintaining the natural appearance of the surrounding landscape.

The system incorporates two primary components: an intake bay skimming system and an Aquascape upflow bog filtration system.

The intake bay functions much like a swimming pool skimmer, but on a considerably larger scale. Positioned slightly lower than the surrounding water, it directs surface flow into a designated collection area. This makes it easy to remove leaves and other floating debris with a net.

Even the drainage and overflow components were incorporated into the landscape design. A small bridge and river rock conceal functional elements, allowing water to move through the system without compromising the pond’s natural appearance.

Water is also circulated through an upflow bog filtration chamber approximately 6 feet deep, containing thousands of pounds of layered rock. As water moves upward through the stone, suspended particles are captured, while beneficial microorganisms colonizing the rock surfaces help process nutrients and organic material.

The result is a filtration approach inspired by natural aquatic ecosystems but engineered to accommodate the extraordinary scale of the project.

At this scale, the challenge extends beyond simply moving and filtering water. Each component must function efficiently while remaining visually integrated into the landscape. The combination of naturalistic stonework, concealed infrastructure and biological filtration allows the pond to maintain the appearance of a natural body of water without sacrificing the engineered systems supporting it.

Creating a living ecosystem

Beyond its recreational features, the pond was designed to support a diverse aquatic environment.

An avid bass fisherman and friend of the homeowner introduced several rounds of bass to establish a fishing population. The initial stocking was unsuccessful, potentially because the developing ecosystem had not yet established a sufficient food supply, with winter losses presenting an additional challenge.

Subsequent stocking efforts have been more successful, and the pond now supports an active fishing area.

The shallow remediation zone, submerged wood and extensive aquatic plantings provide additional habitat opportunities for smaller fish, amphibians and beneficial microorganisms, creating an ecosystem that will continue developing as the pond matures.

A pond that’s still growing up

shallow pond

At under a year old, the ecosystem is still establishing itself. The pond has experienced a mild algae bloom, something that can occur as a new aquatic system develops and its biological processes begin to stabilize.

As the aquatic plants mature, lily pads and other surface coverage will expand, reducing the amount of direct sunlight reaching the water and helping manage algae growth over time.

The surrounding landscaping, including Japanese maples, is expected to follow a similar progression. The first year focuses largely on establishment, followed by root development and increasingly visible growth in subsequent seasons.

Five years from now, the landscape surrounding the pond is expected to look substantially different as the plantings mature and the entire feature becomes more integrated into its environment.

Despite its already impressive footprint, there is even talk of expanding the pond further. As Zawistowski jokes, “It’s just not big enough.”

Built to last and built with pride

skid steer loader working on rec pond construction

Every job leaves a mark on the crew that builds it, and this one is no exception. Water feature construction at this scale is physically demanding work, and getting it right takes persistence through rain, springs and equipment challenges most residential builds never encounter.

For Zawistowski and his crew, that physical investment is part of creating something at this level. It’s an approach they describe as “bleeding for beauty” — an acknowledgment that creating a water feature of this scale requires an unusual amount of effort, persistence and passion.

That commitment shows in the level of detail carried through every part of the design, from the engineered filtration system and massive stonework to the reclaimed oak log incorporated into the finished pond.

What began as a challenging low spot on the property has become a destination for swimming, fishing, relaxation and wildlife — a living landscape that will continue evolving long after construction is complete.


Contractor’s Corner Winner!

Contractor's Corners

This project was selected as POND Trade’s Contractor’s Corner winner for this past quarter!

Sponsored by Pondliner, Contractor’s Corner gives pond and water-feature professionals the opportunity to showcase their best work in the pages of POND Trade Magazine. From standout pond builds and dramatic transformations to innovative water features and unique project challenges, we want to see what you’ve been working on.

Think your project has what it takes?

Submit your project here for a chance to be our next Contractor’s Corner winner and be featured in POND Trade Magazine!

The Koi Experience - Atlantic Oase

Leave a Comment

Your email address will not be published. Required fields are marked *

More Articles

Fountain Equipment Group Introduces ZP2 UVC Pro Systems for Cleaner, Healthier Water

Fountain Equipment Group offers its ZP2 UVC Pro and Premium UV systems, designed ...

2026 HNA Awards Celebrate Excellence in Hardscaping

Powell Family Backyard Oasis in Powhatan, Virginia was the winner in the Porcelain ...

Rebuilding a 20-Year-Old Entry Pond Into a 50-Foot Waterfall Walkway

This job started with a maintenance call. Jon had just bought a home ...

EasyPro Pond Products Connects With Industry Professionals at PPA Retreat

EasyPro Pond Products participated in the Pond Professionals Alliance (PPA) annual retreat in ...
Scroll to Top