Poway Overhaul

By Mark Lawson

Published on November 1, 2014

We received a call from Rob Shannon Concrete Pumping in El Cajon, California about a pond in Poway. The homeowner, Greg, was looking for advice and guidance. We set up a time to meet, and after seeing the canvas we went to work.

“This will be a great project!” we thought. “This has so much potential for many Contractor Corner Winnersreasons.” We sat down and started right away on the design. Greg had already done some research and was familiar with several different systems but was confused as to how to put it all together. But that’s where we came in and brought it all together for him.

As you can see, the site had sat for some time from the day he started his dream to now, but with the help of local students on summer jobs, they made a big change quickly.

The Components

We laid it out on the ground and the boys went to work! Thanks to INmotion Distributors, we provided two four-inch Rhino I Bottom drains, two sequence pumps, an air disc, an Evo 110 UV system, and an EA Air Pump 70. Helix Life Support Systems provided two Helix Moving Bed Waterfalls Large, two Helix Settlement Tanks and also two Savio Skimmers that Greg already had. Greg also had a great selection of rocks and boulders to use on and around the pond.

The Work

After a few shorts weeks the pond basin had been reshaped. Trenches were dug for filtration circuits consisting of two bottom drains, one air dome, four Tangential Pond Returns and two skimmers. Two separate filtration circuits allowed the system to be cleaned one circuit on and one off; that way, if any equipment should fail on a circuit, you will still have flow and filtration from the other circuit.

Sequence Pumps picks up from the Helix Settlement Tank by four-inch pipe feed from the bottom drain, and also from a Savio skimmer on a two-inch feed. Both are controlled by a three-way Jandy valve to balance flow between the Savio skimmer and the Helix Settlement Tank. The return line from one pump runs through an Evo 110 UV system and then is split and sent to Helix Moving Bed Waterfalls Large (5,000 GPH) and two Tangential Pond Returns splitting (1,500 GPH). The other circuit is the same setup, but without a UV.

CC_lawson_2 KODAK Digital Still Camera
[box]The pond basin is ready for build-out, photo right, and the now sprayed pond with polyurea is ready for the waterfall construction.[/box]

Paul Parszik of Artisan Aquatics applied the polyurea over dirt using a fiber textile system that he uses just for this type of application. If you’re thinking of having polyurea done, by all means contact Paul. He is the best!

After polyurea was done Greg went back to work and did what I thought was an outstanding job of building his waterfall, considering that he has never built one before! He moved large boulders around the yard the old-fashioned way: “Egyptian style.” With PVC pipe laid out in front of the boulder, he’d push the boulder forward. Then, taking the PVC pipe from behind the boulder, he’d move it to the front and push the boulder again. I saw him move a 700-pound boulder that way with no problem!

After all was said and done, the waterfall was done and we fired the system up and WOW! What a great cascading flow off the waterfall stones. Aeration, hypnotic sound—Greg has it all going on.

Over the following weeks, Greg completed the edging, landscaping and a few boulders around the pond for sitting. He also set the bridge spanning across the whole pond and added four large koi. We also took sustainability into consideration, with water from backwashing and draining settling tanks along with water change-outs to be used in his large garden. Water is pumped up to a 275-gallon tote, where Greg can then gravity-feed the water, thus utilizing the nutrient-rich water by recycling it to garden plants.

This pond will be the center of attention for all the club members when Greg holds a meeting for Koi Club San Diego at his house.

>> VIDEO of the pond buildout

Mark “Koiman” Lawson is the owner of the Koi Depot in San Diego. He has over 25 years of experience and his passion is to provide the best environment for the growth and health of your Koi. Koi Depot is a full service company that offers retro fitting, service, designing, koi health, leaks, resealing and more. http://www.koidepot.com

Contractors Corner

Contractors - Tell us Your Story!

Submit a 1,000 to 1,200 word article on a recent pond installation or technology application, along with three photos, and enter to win a spot in Contractor’s Corner spotlight on PONDtrademag.com. Our Contractor’s Corner sponsor, Pondliner, will review all case studies submitted for each quarter and will pick the best one to feature on PONDtrademag.com’s home page. The winner will also receive $250 worth of Pondliner products. A few rules apply. You must be a professional pond installer in order to write an article. Please provide the name of your company too.

Click here for more information.

1 thought on “Poway Overhaul”

  1. Pingback: Video | Poway Project via Contractor's Corner - POND Trade Magazine

Leave a Comment

Your email address will not be published. Required fields are marked *

contractors-corner

Specifications

Design/Installation: Homeowner and Koi Depot San Diego

Consultation Services Contact Info: mark@koidepot.com

Project Location: Poway, California

Pond Size: 6,000 Gallons

Total Components:

  • Helix Life Support System: Two Large Moving Bed Bio-Falls rated for up to one pound of food per day.
  • Helix Life Support System: Settling Chambers with four-inch inlets with custom backwashing drains
  • Savio Skimmers: Two — One large opening and one small opening
  • Rhino I Bottom Drains: Two four-inch, non-aerated drains
  • One nine-inch Air Disk
  • Four Tangential Pond Returns (TPRs)
  • EA Air Pump 70s: Two — One for Air Disk and One for Two Moving Bed Bio-falls
  • EA Evo 110 UV system
  • Sequence Pumps: Two 6800 SEQ22 at 6,800 GPH. One pump per filtration circuit.

Polyurea: Paul Parszik of Artisan Aquatics

Completion Time: A 1-2 month span during weekends and afternoons

Project Cost: $25K+

READ CURRENT ISSUE

TRENDING ARTICLES

gallery spotlight
Japanese Koi Kodama

More Articles

More Articles

Kick-Ass Pond Fittings Launches New Product Line

A groundbreaking partnership between Zac Penn of Deepwater Koi Innovations and Shawn Rosen ...

Black Oak Foundry Introduces New Product

Black Oak Foundry developed a new line of glass backplates to add that ...

Fitz’s Fish Ponds & Polo Reef Win Grand Champion at All-American Koi Show

The inaugural All-American Koi Show held in Las Vegas on March 23rd and ...

Crafting a recreational swim pond in West Michigan

Swim pond illuminated Nestled within the rustic greenery of a West Michigan backyard, ...
Scroll to Top